Building a stone retaining wall in Coffs Harbour isn’t just practical—it’s also a beautiful addition to your property. There are very few flat blocks in Coffs and therefore the best way to deal with different levels is to build retaining walls. But, getting it right involves understanding the basics and executing them well. In this article, we’ll be talking about the dry-stack method. So, let’s take a look at the steps you need to take to create a durable and appealing stone wall construction.
Stone Wall Construction – Choose Your Stones Wisely
Rather than sorting as you go, sort your stones by size and shape first. For instance, you’ll want larger, flatter stones for the base to ensure stability. For the top, or the wall’s “cap,” choose your smoothest, most appealing stones. Oddly shaped or varied sizes can be used in between for visual interest and uniqueness. Plus, you can chisel rocks to create the shapes you need.
Level Up
Before you start stacking, you need to create a level. This involves using wood stakes connected by a string line. This line indicates where the front face of your wall will be.
Excavate and Lay the Foundation
Next, dig out the area defined by your string line. Dig a trench and remove all loose dirt. After excavation, line the trench with landscape fabric, not plastic. This prevents soil from mixing with gravel. Now, form the wall base by filling the trench with compactable gravel, around 12cm deep. Lastly, flatten and compact the gravel before adding a layer of coarse sand on top. Don’t rush this stage, it’s vital that your stone wall construction begins with a solid foundation.
Stone Wall Construction
With the base ready, lay the first course of stones along the trench’s front edge. Adjust the level of sand under each stone as needed to keep the top level even. All stones in the first row must sit flush and level.
For the second and further courses, apply the bricklaying rule of offsetting each stone over the joint below. This pattern adds strength to the wall. Also, set the stones with a slight backward lean—about a centimetre per course. This technique helps your wall resist soil pressure from behind.
The Backfill
Backfill refers to the gravel you chuck behind the wall. So, as your wall grows, backfill the space behind it with gravel, not soil. This enhances drainage, which is crucial for wall longevity. Tamp the gravel down firmly as you go to remove air gaps.
Finishing Touches
When near completion, fold the landscape fabric over the top of the gravel before adding your final stone courses or capstones. Also, consider fixing capstones with masonry adhesive for additional security if using them.
Final Layer: Soil
After placing the top stones, trim the landscape fabric to just above wall height. You can now backfill with topsoil behind your wall.








